Potato starch production process

Potato starch production process-potato processing machinery

Potato starch production process description :

     The potato starch production process include :Raw material receiving unit ;  Water transport unit ; De-stone and washing unit ;  Crushing unit ; De-sanding unit ;  Centrifugal extracting unit ; Concentration and refining unit ; Vacuum dewatering unit ; Air drying unit ;  Sieving and packing unit .

(1) Raw material receiving unit:

     The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyer and enters into the storage pool, and the rubbish will be carried away by truck.

(2) Water transport unit:

      The exit of the storage pool is water transportation channel. The potato will be sent by water force into de-stone machine. Meanwhile, the remaining sand and dirt will be again cleaned out by rolling and friction.

(3) De-stone and washing unit:

      Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities . Then the potato is sent by bulk elevator into temporary storage.

(4) Crushing unit:

      The crushing unit is the most important step for extracting potato starch. The feeding screw transport the clean potato into crushing machine. Highly-efficient crushing machine will release the starch in potato at most.

(5) De-sanding unit:

      After crushing, the starch milk is transferred to de-sanding machine . The hydro-cyclone divide the milk into two parts: the light part which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

(6) Centrifugal extracting unit:

      The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue dewatering unit.